Audix M1280-BHC Condenser Hypercardioid Microphone
Product Description
The black Audix M1280-BHC Condenser Hypercardioid Microphone is a miniaturized condenser microphone with a fully integrated pre-amp and detachable cable, has complete immunity from RF interference caused by cell phones and GSM devices. The M1280-BHC is equipped with a hypercardioid capsule and is also available with omni or shotgun capsules.
Additional information
| Weight | 0.6 lbs |
|---|---|
| Dimensions | 10.9 × 2.3 × 2.3 in |
More from this brand
$419.00
Available on backorder
Add to Wishlist
More Items To Consider
Related products
-
Neumann KM 184 NI Microphone (Nickel)
$849.00 Add to cart -
Neumann TLM 67 Multi-Pattern Switchable Studio Microphone (Pearl Gray/Nickel)
$2,195.00 Add to cart -
Sennheiser MKH416 P48 U3 Shotgun Microphone
$999.00 Add to cart -
Neumann U 87 Ai Condenser Microphone (Black)
$3,295.00 Add to cart -
Sennheiser MK8 Condenser Microphone
$699.00 Read more -
Neumann KM 184 MT Microphone (Matte Black)
$849.00 Add to cart -
Neumann TLM 102 Large Diaphragm Studio Condenser Microphone (Black)
$729.00 Add to cart
Description
The black Audix M1280-BHC Condenser Hypercardioid Microphone is a miniaturized condenser microphone with a fully integrated pre-amp and detachable cable, has complete immunity from RF interference caused by cell phones and GSM devices. The M1280-BHC is equipped with a hypercardioid capsule and is also available with omni or shotgun capsules. The microphone has a very wide frequency response and can be used in a wide variety of live, studio and broadcast applications. It can be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.
Audix M1280-BHC Features
-
- Lightweight, small profile
- Miniaturized pre-amp circuitry
- No external power adapter needed
- 12mm gold vapor diaphragm
- Immune to RF interference
- Extremely low noise, high SPL handling
- Made in the USA
Applications
-
- Overhead mic for choir, group vocal
- Acoustic instruments
- Ambient room miking
- Symphonic area miking
- Speech, presentation, podium
- Cymbals, percussion
- Acoustic guitar
Specifications
- Transducer Type: Condenser
- Frequency Response: 40 Hz to 20 kHz
- Polar Pattern: Hypercardioid
- Output Impedance: 150 Ohms
- Sensitivity: 10 mV (C/HC), 12 mV (O), 18 mV (S) / Pa @ 1k
- S/N Ratio: 73 dB
- Equivalent Noise Level: 21 dB (A-weighted)
- Maximum SPL: ≥147 dB
- Dynamic Range: 126 dB
- Power Requirements: 18 to 52 V
- Connector: 3-pin XLRm
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Material: Machined brass
- Length: 2.6″ (67 mm)
- Weight: 1 oz (28 g)