CAD UHF Dual Channel Handheld Wireless Microphone System

The CAD UHF Dual Channel Handheld Wireless Microphone System is intended for live sound reinforcement. The system consists of two handheld wireless dynamic microphone transmitters and a two-channel UHF receiver station. The handheld microphones feature on, off, and mute functions to conserve battery life. They operate on two AA batteries and will last for more than 10 hours before requiring recharge or replacement.

The CAD UHF Dual Channel receiver features a power button and LED indicators for power, radio signal, and audio signal. The back of the device includes a DC power jack, volume controls for channels A and B, balanced XLR connectors for channels A and B, and an unbalanced 1/4″ connector for channel B. The top of the device features a recessed compact dipole antenna for improved reception of the UHF spectrum.

CAD UHF Dual ChannelFeatures

Receiver

• Maximum Output Level: 6 dBV
• Output Impedance: 800 Ω
• Frequency Response: 20 to 20,000 Hz
• Frequency Band: UHF
• Transmission Channels: L: 567.1 MHz / 593.5 MHz
• RF Sensitivity: -105 dBm
• Output Connectors
  • 2 x balanced XLR-Male
  • 1 x unbalanced 1/4″
• Operating Distance: 400′ (122 m) unobstructed
• Dimensions (W x D x H): 15 x 11 x 3.0″ (38 x 28 x 7.6 cm)
• Weight: 3.0 lb (1.4 kg)

Microphone

• Operating Principle: Moving coil dynamic
• Polar Pattern: Supercardioid
• Frequency Response: 80 to 16,000 Hz
• Sensitivity: -33 dBV (22 mV) at 1 Pa
• Maximum SPL: 135 dB
• Dynamic Range: >105 dBA
• Transmitter Level: 10 mW
• Modulation: FM
• Power Requirements: 2 x AA alkaline or rechargeable battery
• Battery Life: >10 hours (alkaline)