PreSonus ULT12 1,300W 2-way Active Loudspeaker

The PreSonus ULT12 1,300W 2-way Active Loudspeaker’s custom-designed Pivot X110 rotatable horn combines ultra-wide horizontal coverage (110°) for broad coverage with focused vertical dispersion (50°) for superior throw. The result is a loudspeaker that can fill the room without introducing early reflections that muddy the sound. In addition, the Pivot X110 horn’s large size enables it to control the dispersion pattern lower in the frequency range than smaller conventional horns, so it maintains more consistent gain on- and off-axis, ensuring that the audience at the sides has the same listening experience as those in front. The result is sound reproduction that fills the entire room, evenly providing optimal audio.

PreSonus ULT12 Features

Acoustic Performance

• Configuration: 2-way biamped
• Frequency Response (-3 dB): 55 Hz – 18 kHz
• Frequency Response (-10 dB): 50 Hz – 20 kHz
• Nominal Coverage (-6 dB): 110° x 50°
• Maximum Peak SPL: 135 dB
• Crossover Frequency: 1.6 kHz

Transducer

• LF Transducer: 1×12″ Ferrite
• Voice Coil Diameter: 2.5”
• HF Transducer: 1.75″ compression driver

Amplifier

• Type: Class D
• Total Power Output: 1,300W Peak (650 RMS)
• LF Power: 1,000W Peak (500W RMS)
• HF Power: 300W Peak (150W RMS)
• Cooling: Free air convection
• Rated THD: <0.05% (20 Hz – 20 kHz)
• Dynamic Range: 119 dB (A-weighted)
• Bandwidth: 20 Hz – 20 kHz

Connections and Controls

• Input Channels: 1 mic/line, 1 line
• Input Connector Types: 2 combo
• Mic Input Impedance: 1 kΩ
• Line Input Impedance: 10 kΩ
• Maximum Input: +22 dBu
• Output Connector: 2 XLR (M): Mix out, Direct out
• Controls: Mic/Line Level, Line/Level, Preset Select, HPF On/Off,Front LED On/Off
• Indicators: DSP Preset, HPF On/Off, Front LED On/Off, Signal, Clip, Thermal

DSP

• Presets: FOH, MON, DJ
• Polarity: —
• HPF: 100 Hz, 4th-order Linkwitz-Riley
• Bit Depth: 24-bit
• Sample Rate: 96 kHz

Enclosure

• Material: Eucalyptus Plywood
• Finish: Chemline™ polyurethane
• Grille: Powder-coated steel
• Dimensions (HxDxW): 25.25” x 14” x 13.9” (641 mm x 356 mm x 353 mm)
• Unit Weight: 52 lbs. (23.6 kg)
• Handles: 2 (Top and Side)
• Monitor Angle: 30°

Safety

• Amplifier Protection: Over-current, DC, over/under-voltage, over-temperature, high frequency
• Transducer Protection: limiter

Power

• AC Power Input: 100-230V~, 50-60 Hz
• AC Power Consumption (1/8 Power): 150W

Suspension Mounting

• Rigging Points: 12 M10
• Mounting: 35 mm, 2-position