Audix SCX25A-PS Studio Condenser Microphone

Product Description

The piano miking system from Audix SCX25A-PS Studio Condenser Microphone is designed to be used with pianos, and includes two SCX25A microphones, two DFLEX piano mounting clips, and two high quality quad conductor microphone cables with braided shields to reduce noise induction from external sources.

Additional information

Weight 8.3 lbs
Dimensions 16 × 14 × 5.5 in
MPN

TMP ID

More from this brand

$1,699.00

Available on backorder

Add to Wishlist

Description

The piano miking system from Audix SCX25A-PS Studio Condenser Microphone is designed to be used with pianos, and includes two SCX25A microphones, two DFLEX piano mounting clips, and two high quality quad conductor microphone cables with braided shields to reduce noise induction from external sources. It features a capsule suspension system where the capsule is shockmounted within a machined brass ring, isolating it from the mic body and electronics. This system minimizes acoustic reflections and diffractions, delivering a pure, open air sound with detail and realism. The microphone is also consistent when responding to on and off-axis signals and exhibits maximum phase coherence and minimal proximity effect. There is a wide cardioid polar pattern, enabling you to blend the sound of the instrument or vocal with the sound of the room. It can handle SPLs in excess of 135 dB and provides up to 20 dB of ambient noise rejection.

  • Slim profile for optimal placement with acoustic pianos, vibes, acoustic guitars, overheads, and, percussion
  • Linear 20 Hz to 20 kHz frequency response which accurately reproduces audio in clear detail
  • Cardioid polar pattern effectively minimizes noise and ambiance at the off-axis sections of the capsule

Audix SCX25A-PS Features

  • Innovative Design
  • Isolated Capsule Suspension System
  • Low Noise Electronics
  • Extremely Small Footprint With A Brass Body Only 4″ Long
  • Applications:
  • Studio Vocals
  • Voice Over
  • Choirs
  • Piano
  • Drums
  • Overheads
  • Sax
  • Guitar
Specifications
  • Type: Condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 20Hz – 20kHz
  • Impedence: 200 ohms
  • Sensitivity @1k 22 mV/Pa: 28 mV / Pa
  • Equivalent Noise Level: 14 dB (A Weighted)
  • Signal to Noise Ratio: 80 dB
  • Maximum SPL: >135 dB
  • Dynamic Range: 121 dB
  • Power Requirements: 48-52 volts Phantom
  • Connector: Switchcraft Male XLR
  • Weight: 8.6 Ounces (244 g)
  • Length: 5.8 Inches (148 mm)